利用偶联技术制备核电池用镍膜的工艺初探  

Pilot Studies on Preparation of Nickel Films Used in Nuclear Batteries Based on Coupling Technology

作　　者：胡睿[1] 魏洪源[1] 熊晓玲[1] 张华明[1] 王关全[1] 杨玉青[1] 

机构地区：[1]中国工程物理研究院核物理与化学研究所,绵阳621900

出　　处：《表面技术》2010年第4期62-64,共3页Surface Technology

基　　金：中国工程物理研究院科学技术发展基金资助项目(2007A02001)

摘　　要：曲面换能单元的核电池中镍-63的加载难以用常规源片加载法实现。采用偶联技术,对功能高分子膜的表面用偶联剂改性后进行活化处理,初步制备了镀有非放镍的高分子薄膜,并分析了此工艺的反应机理。采用该工艺可避免常规化学镀镍方法中试剂对半导体材料的损伤。It is difficult to achieve the incorporation of nickel-63 onto the non-planar transducer unit in nuclear batteries with conventional sheet radioisotope sources.By coupling technique,the surface of functional polymer membrane was modified with coupling agents and activated.The polymer film plated with stable nickel was prepared initially.And the reaction mechanism of this process was analyzed.This kind of process made the semiconductor material avoid the damages which brought by some chemical reagents in the conventional method of electroless nickel plating.

关 键 词：核电池 镍 加载 

分 类 号：TQ153.3[化学工程—电化学工业]