检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈健[1,2] 林君[1,2] 张文秀[1,2] 彭黎利[1,2]
机构地区:[1]吉林大学仪器科学与电气工程学院,吉林长春130026 [2]吉林大学地球信息探测仪器教育部重点实验室,吉林长春130026
出 处:《物探与化探》2010年第5期600-603,609,共5页Geophysical and Geochemical Exploration
基 金:国家自然科学基金科学仪器专项(40727002)
摘 要:为了使阵列式激发极化接收机采集通道一致,需要设计特定的校准信号源,为此设计和实现了以USB2.0为通信协议的类激发极化信号源。系统以直接数字合成技术(DDFS)理论为基础,采用大规模现场可编程门阵列技术,设计了DDFS内核,结合M atlab产生上述模型响应的数据。该类激发极化信号源输出电压可以在1μV^1 V可调,步进为0.038μV,信噪比大于40 dB,输出频率为1、0.25、0.125、0.062 5 Hz,误差为1.8×10-5Hz。该类激发极化信号源已经在分布式阵列电磁接收系统的主站的多通道校准工作得到了应用。In order to realize consistency of acquisition channels of array receivers for Induced polarization,it's necessary to design a special calibration source.The induced polarization-similar source based on US2.0 communications protocol was designed and implemented.This design is based on the theoretical foundation of DDFS and uses field-programmable gate array to design core of DDFS,with the generation of model sounding data.The induced polarization-simulated source can be adjusted between 1 μV and 1 V with the step of 0.038 μV.The output of frequency is 1,0.25,0.125,0.062 5 Hz,while the error is 1.8×10^-5 Hz.It has been applied in the main electromagnetic probe system.
分 类 号:TH762[机械工程—仪器科学与技术] TN74[机械工程—精密仪器及机械]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.70