非满载罐式车辆静态侧倾模型的研究  

Research on static rollover model of partially filled tank vehicles

作　　者：杨益明[1] 

机构地区：[1]南京交通职业技术学院,江苏南京211188

出　　处：《传感器与微系统》2010年第10期28-30,共3页Transducer and Microsystem Technologies

基　　金：江苏省交通科学研究计划资助项目(06C03)

摘　　要：采用试验测试、理论推算和参考文献相结合的方法获取所选车型的基本参数;根据基本参数在ADAMS/View中建立了底盘型号为EQ1141G7DJ的非满载罐式车辆静态侧倾仿真模型。进行了一定条件下的实车试验,根据其结果对仿真模型进行了修正,建立了满足精度要求的侧倾仿真模型。A method which combines experiment test,theoretical calculations with references is used to get basic parameters of the selected vehicle. The static rollover simulation model of partially filled tank vehicles （ the type of chassis was EQ1141G7DJ） in the ADAMS/View based on principle parameters. Some real vehicle experiments were carried out under special conditions. According to the experimental results, the simulation model is modified, which can meet the requirements of precision.

关 键 词：罐式车辆 侧倾 仿真 ADAMS 

分 类 号：U461.91[机械工程—车辆工程]