基于Zigbee的综采工作面设备及环境远程监测系统设计  

Remote Monitoring System for Equipments and Environment in Full-mechanized Face Based on Zigbee

作　　者：蒋恒深[1,2] 张晓光[1,2] 李辉[1] 仝维仁[1] 

机构地区：[1]中国矿业大学机电工程学院,江苏徐州221008 [2]西安电子科技大学综合业务网络理论及关键技术国家重点实验室,陕西西安710071

出　　处：《仪表技术与传感器》2010年第9期36-39,共4页Instrument Technique and Sensor

基　　金：中国博士后科学基金一等资助项目(20060390277);江苏省博士后科研资助计划项目(0502010B);国家重点实验室开放课题研究项目(ISN10-10)

摘　　要：文中针对煤矿综采工作面采煤设备以及工作面环境信息在实际生产中无法远程监测的问题,设计了一种采用工业以太网和基于Zigbee的无线传感器网络(该无线传感器网络采用改型Zigbee路由协议—ZFA协议)构建的远程监测系统,通过无线传感器网络采集综采工作面的采煤机、刮板输送机、液压支架及综采面瓦斯浓度、温度、湿度等监测信息,传至坑道上的信息处理接收终端,终端通过矿井工业以太网将数据传输至地面上的监测计算机,由计算机进行分析数据,对设备状况及综采面安全做出评估,对实现综采自动化具有重要意义。This paper designed a remote monitoring system used industrial Ethernet and wireless sensor network based on Zigbee（and ZFA routing protocol which improved by Zigbee was used in this WSN）,for the problem of remote monitoring the equipments and environmental information in full-mechanized face during the actual production.The datum collected by sensors such as shearer,scraper conveyer,hydraulic support and gas concentration,temperature,humidity and other information in full-mechanized face could be sent to the information processing and receiving terminal,then this terminal transmitted the datum to the computer by industrial Ethernet which was used for monitoring on the ground.The computer analyzed these data and made an assessment of mine safety,it has important significance to realize the automation of full-mechanized face.

关 键 词：综采工作面 无线传感器网络 远程监测 ZIGBEE ZFA 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]