高速线材的轧后冷却温度场分析  

Analysis on Temperature Field of High Speed Wire in the Controlled Cooling Zones

作　　者：谢英杰[1,2] 赵德文[2] 杨建朝 高文柱 

机构地区：[1]西部金属材料股份有限公司,西安710201 [2]东北大学轧制技术与连轧自动化国家重点实验室,沈阳110004

出　　处：《科学技术与工程》2010年第29期7138-7141,共4页Science Technology and Engineering

基　　金：国家科技支撑计划课题(2007BAE07B02);陕西省重大科技创新专项资金项目(2009ZKC03-01)资助

摘　　要：针对国内某厂风冷区前段增加喷雾冷却装置的Stelmor冷却工艺,分别对快速水冷段、喷雾冷却段、风冷区建立了数学模型,用有限元模拟软件ANSYS模拟了控制冷却时Φ8mm高速线材的温度场。模拟结果与现场实测值吻合较好。The mathematic model is made for the reconstructed Stelmor process in some steel works.FEM to simulate the temperature filed of Φ8 mm high speed wire is applied when it passed through the water cooling zone,added mist cooling zone and foced air cooling zone.Good agreement is found between predicted results and experimentsally measured wire suface temperature.

关 键 词：高速线材 传热 温度场 

分 类 号：TG335.11[金属学及工艺—金属压力加工]