基于模式匹配的同轴腔耦合分析及其应用  

Analysis of Coupling Between Coaxial Cavities Based on Mode Matching Method and its Application

作　　者：李镇[1] 孙兆鹏[1] 

机构地区：[1]南京电子技术研究所,南京210039

出　　处：《微波学报》2010年第5期68-72,共5页Journal of Microwaves

摘　　要：采用半解析的模式匹配方法分析并计算矩形同轴谐振腔之间窗口耦合的耦合系数,结合等效电路计算了存在第三个谐振腔时两同轴谐振腔之间窗口耦合的耦合系数。比较了计算两腔的耦合系数时,采用模式匹配法和有限元法的计算效率。结果表明,达到相同精度时,模式匹配法具有更高的计算速度。根据计算所得耦合系数设计了两个分别具有对称响应和非对称响应的C波段同轴腔滤波器,经调试后,滤波器测试结果与设计的理论响应吻合较好,验证了模式匹配方法计算矩形同轴谐振腔通过窗口耦合的耦合系数的有效性。The coupling coefficient between rectangular coaxial cavities is analyzed and calculated by the quasi-analytical mode matching method,and the coupling coefficient between two coaxial cavities with a third cavity existing is calculated through the equivalent circuit.The calculation efficiency of the mode matching method is compared with that of the finite element method when they are applied to calculate the coupling coefficient between two coaxial cavities.It shows that the mode matching method is more fast under the same accuracy.Two C-band coaxial cavity filters are designed with the coupling coefficients which are calculated with mode matching method,the measured response of the filters being adjusted finely keep good agreement with the prototype values,it shows the validity of this design method.

关 键 词：模式匹配 同轴腔 耦合 滤波器 

分 类 号：TN713[电子电信—电路与系统]