Preparation and study on performance of submicron nickel powder for multilayer chip positive temperature coefficient resistance  

作　　者：陈勇 龚树萍 傅邱云 郑志平 黄日明 苏鹏 

机构地区：[1]Department of Electronic Science & Technology,Huazhong University of Science & Technology [2]School of Physics and Electronic Technology and Key Laboratory of Ferroelectric and Piezoelectric Materials and Devices of Hubei Province,Hubei University

出　　处：《Chinese Physics B》2010年第11期571-575,共5页中国物理B（英文版）

基　　金：Project supported by the "863" (Grant No. SQ2008AA03Z4471960);the National Natural Science Foundation of China(Grant No. 60676050)

摘　　要：Base metal nickel is often used as the inner electrode in multilayer chip positive temperature coefficient resistance （PTCR）. The fine grain of ceramic powders and base metal nickel are necessary. This paper uses reducing hydrazine to gain submicron nickel powder whose diameter was 200-300 nm through adjusting the consumption of nucleating agent PVP properly. The submicron nickel powder could disperse well and was fit for co--fired of multilayer chip PTCR. It analyes the submicron nickel powder through x-ray Diffraction （XRD） and calculates the diameter of nickel by PDF cards. Using XRD analyses it obtains several conclusions： If the molar ratio of hydrazine hydrate and nickel sulfate is kept to be a constant, when enlarging the molar ratio of NaOH/Ni^2＋, the diameter of nickel powder would become smaller. When the temperature in the experiment raises to 70-80 ℃, nickel powder becomes smaller too. And if the molar ratio of NaOH/Ni2＋ is 4, when molar ratio of （C2H5O）2/Ni^2＋ increases, the diameter of nickel would reduce. Results from viewing the powders by optical microscope should be the fact that the electrode made by submicron nickel powder has a better formation and compactness. Furthermore, the sheet resistance testing shows that the electrode made by submicron nickel is smaller than that made by micron nickel.Base metal nickel is often used as the inner electrode in multilayer chip positive temperature coefficient resistance （PTCR）. The fine grain of ceramic powders and base metal nickel are necessary. This paper uses reducing hydrazine to gain submicron nickel powder whose diameter was 200-300 nm through adjusting the consumption of nucleating agent PVP properly. The submicron nickel powder could disperse well and was fit for co--fired of multilayer chip PTCR. It analyes the submicron nickel powder through x-ray Diffraction （XRD） and calculates the diameter of nickel by PDF cards. Using XRD analyses it obtains several conclusions： If the molar ratio of hydrazine hydrate and nickel sulfate is kept to be a constant, when enlarging the molar ratio of NaOH/Ni^2＋, the diameter of nickel powder would become smaller. When the temperature in the experiment raises to 70-80 ℃, nickel powder becomes smaller too. And if the molar ratio of NaOH/Ni2＋ is 4, when molar ratio of （C2H5O）2/Ni^2＋ increases, the diameter of nickel would reduce. Results from viewing the powders by optical microscope should be the fact that the electrode made by submicron nickel powder has a better formation and compactness. Furthermore, the sheet resistance testing shows that the electrode made by submicron nickel is smaller than that made by micron nickel.

关 键 词：SUBMICRON nickel powder liquid-reduction process positive temperature coefficient （PTC） 

分 类 号：TB383.3[一般工业技术—材料科学与工程]