塑料模具标准件顶杆整体淬火用65MnV钢的组织与性能  

MICROSTRUCTURE AND PROPERTIES OF 65MnV USED FORWHOLE QUENCHED EJECTOR PINS OF PLASTIC DIES

作　　者：许大庆[1] 赵建生[1] 程宇航 陈钰秋 

机构地区：[1]华中理工大学

出　　处：《钢铁》1999年第4期40-42,共3页Iron and Steel

摘　　要：分析了塑料模具标准件顶杆的工作条件和性能要求，研究了顶杆整体淬火用钢６５ＭｎＶ的热处理工艺、组织和力学、工艺性能，并与目前国内常用顶杆用钢进行了比较，同时探讨了６５ＭｎＶ钢的强韧化机制。研究结果表明，６５ＭｎＶ钢有较高的力学性能和良好的工艺性能，强度可达σ０．２＝２０５７．４ＭＰａ，σｂ＝２３４２．７ＭＰａ，冲击韧性ａＫ＝１０．４４Ｊ／ｃｍ２，淬火硬度在ＨＲＣ６２以上，是理想的顶杆整体淬火用钢。The working conditions and property requirement of steel used for ejector pins of plastic dies were investigated.Heat treatment,microstructure and mechanical,technological properties of 65MnV steel used for whole quenched ejector pins were tested and compared with that of other steels used now.Results show that 65MnV steel has superior mechanical and good technological properties.The strength and toughness of 65MnV steel are 02= 2 0574 MPa, b= 2 3427 MPa, a K=1044 J/cm2.Hardness after quenching is over HRC 62,so 65MnV steel is an ideal steel used for whole quenched ejector pins.

关 键 词：塑料模具 顶杆 整体淬火 组织 性能 合金钢 

分 类 号：TG142.45[一般工业技术—材料科学与工程] TQ320.52[金属学及工艺—金属材料]