CaO-Al_2O_3-CaF_2-SiO_2-MgO五元精炼渣系的起泡性能  

Foaming Performance of CaO Al 2O 3 CaF 2 SiO 2 MgO Slag

作　　者：兰杰[1,2,3] 姜周华[1,2,3] 黄宗泽[1,2,3] 芮树森[1,2,3] 顾文兵[1,2,3] 罗建江[1,2,3] 解希元 

机构地区：[1]上海交通大学材料系 [2]东北大学钢铁冶金系 [3]宝山钢铁(集团)公司钢研所

出　　处：《钢铁研究学报》1999年第2期14-18,共5页Journal of Iron and Steel Research

摘　　要：采用二次回归正交试验方法测定了１５３０℃下ＣａＯ－Ａｌ２Ｏ３－ＣａＦ２－ＳｉＯ２－ＭｇＯ五元精炼渣系的起泡性能。得出炉渣起泡指数与炉渣光学碱度、渣中Ａｌ２Ｏ３及ＣａＦ２含量间的回归方程。结果表明：炉渣的光学碱度和ＣａＦ２含量对起泡指数有较大影响，而Ａｌ２Ｏ３含量对起泡指数影响很小。具有最佳发泡性能的炉渣成分中ＣａＯ，Ａｌ２Ｏ３，ＣａＦ２，ＳｉＯ２，ＭｇＯ的质量分数分别为：４４．０６％，３０．００％，７．００％，８．９４％，１０％。研究结果还表明：炉渣起泡指数与炉渣粘度成正比，而与表面张力和密度的平方根成反比。The foaming performance of CaO Al 2O 3 CaF 2 SiO 2 MgO slag has been investigated at 1 530 ℃ by means of quadric regression design. A regression equation describing the quantitative relation between foaming index and slag composition has been obtained. The results indicate that optical basicity and CaF 2 greatly influence the foaming index while Al 2O 3 content does not obviously. The slag composition with the optimum foaming performance is CaO 44.06 %, Al 2O 3 30.00 %,CaF 2 7.00 %,SiO 2 8.94 % and MgO 10 %. The further analyses show that the foaming index is proportional to the slag viscosity and is inversely proportional to the square roots of surface tension and density of the slag.

关 键 词：钢包炉 精炼渣 起泡指数 炼钢 

分 类 号：TF769.2[冶金工程—钢铁冶金]