快凝NiAl基催化剂制备脂肪伯胺反应参数的优化  

Optimization of Reaction Conditions for Fatty Nitrile Hydrogenation to Primary Amine Catalyzed by Rapidly Solidified NiAlSiFeCe Alloy

作　　者：张国胜[1,2,3] 沈宁福[1,2,3] 王西科 陈海松[1,2,3] 

机构地区：[1]北京科技大学材料学院 [2]郑州工业大学材料研究中心 [3]郑州工业大学化工学院

出　　处：《郑州工业大学学报》1999年第1期12-14,23,共4页Journal of Zhengzhou University of Technology

基　　金：化工部重点基础研究资助

摘　　要：利用快速凝固ＮｉＡｌＳｉＦｅＣｅ合金制备了新型ＲａｎｅｙＮｉ催化剂．用正交试验法对其脂肪腈加氢制备伯胺的反应参数进行了优化．结果表明：在本试验调节范围内，在ＰＨ２＝３．０ＭＰａ，ＰＮＨ３＝０．９ＭＰａ，Ｔ＝１５５℃，ｔ＝１．５０ｈ，ｍ（Ｃａｔ．）／ｍ（ＲＣＮ）＝０．５％的反应条件下此新型催化剂具有很好的催化性能，脂肪腈转化率和伯胺选择性分别达到了９９．０７％和９４．４１％．A new kind of Raney Ni catalyst was prepared from rapidly solidified NiAlSiFeCe alloy precusor.Cross experimentation was carried out to optimize the reaction conditions for fatty nitrile hydrogenation to primary amine catalyzed by this new catalyst. The results show that the new catalyst produces favourable catalytic properties under the conditions of P H 2 =3.0 MPa, P NH 3 =0.9 MPa, T =428 K, t =1.50 h,Cat./RCN=0.5%(wt.-wt.%) within the adjusting margin, the corresponding convertion ratio of fatty nitrile and selectivity of primary amine are up to 99.07% and 99.41% respectively.

关 键 词：催化性能 脂肪腈加氢 镍铝合金 催化剂 脂肪伯胺 

分 类 号：O623.731[理学—有机化学] O643.36[理学—化学]