纳米碳酸钙填充型粉末丁苯橡胶的制备  被引量:2

Preparation of nano-calcium carbonate filled powdered styrene-butadiene rubber

在线阅读下载全文

作  者:屈国梁[1] 陈雪梅[1] 马新胜[1] 

机构地区:[1]华东理工大学材料科学与工程学院国家超细粉末工程研究中心,上海200237

出  处:《合成橡胶工业》2010年第6期433-437,共5页China Synthetic Rubber Industry

基  金:上海华明高技术(集团)有限公司资助项目

摘  要:以丁苯胶乳和纳米碳酸钙浆料(总固物质量分数均为10%)为原料,以硬脂酸钠与凝聚剂CaCl2反应生成的硬脂酸钙为隔离剂,采用凝聚共沉法制备了纳米碳酸钙填充型粉末丁苯橡胶[P(SBR/CaCO3)],考察了P(SBR/CaCO3)粒径的影响因素,并研究了纳米碳酸钙在SBR中的分散状况。结果表明,在硬脂酸钠为4份、纳米碳酸钙为100份,分散剂/纳米碳酸钙(质量比)为0.04、凝聚搅拌速率为400 r/min、凝聚剂滴加速率为4.5 mL/min的条件下,制得P(SBR/CaCO3)中的纳米碳酸钙在基体中分散均匀,且粒径基本约为50 nm。Nano-CaCO3 filled powdered styrene-butadiene rubber was prepared by coagulation-coprecipitation method,using styrene-butadiene latex and nano-CaCO3 slurry(mass fraction of solid 10%) as raw materials,and the calcium stearate produced by the reaction of sodium stearate and CaCl2 as isolating agent.The influencing factors of particle diameter of powdered styrene-butadiene rubber were investigated,and the dispersion of nano-CaCO3 in the rubber was studied.The results showed that nano-CaCO3 was dispersed uniformly in the rubber matrix and diameter was 50 nm under the optimum process conditions of nano-CaCO3 100 phr,dispersant/nano-CaCO3(mass ratio)0.04,sodium stearate 4 phr,stirring speed 400 r/min,coagulant adding speed 4.5 mL/min.

关 键 词:纳米碳酸钙 丁苯胶乳 填充 粉末丁苯橡胶 凝聚共沉法 粒径分布 

分 类 号:TQ333.1[化学工程—橡胶工业]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象