激光熔覆修复Z形导杆的研究  

Research on Z-shaped Guide Rod Repaired by Laser Cladding

作　　者：许巧玉[1] 

机构地区：[1]新疆大学机械工程学院,乌鲁木齐830047

出　　处：《热加工工艺》2010年第21期151-152,共2页Hot Working Technology

摘　　要：进口的Cr12MoV高碳高合金钢Z形导杆磨损后,选用Ni60A合金粉末,经氧乙炔焰喷涂和激光重熔处理后,熔覆合金层硬度可达到或超过原基体材料的硬度,而且合金层结构致密、晶粒细小,涂层与基体之间形成冶金结合,可满足零件性能要求。The imported Z-shaped guide rod,whose material is high-carbon and high-alloy steel Cr12MoV,was worn out,Ni60A alloy powder was sprayed on it by oxyacetylene flame and laser remelting,the hardness of the cladding alloy can reach or exceed the hardness of the matrix and because of the compact structure of alloy layer,fine grain size,the metallurgical combination is formed between the coating and the substrate,which can meet the performance requirements.

关 键 词：激光熔覆 修复 Z形导杆 

分 类 号：TG456.7[金属学及工艺—焊接]