检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
出 处:《浙江大学学报(工学版)》2010年第10期1890-1896,共7页Journal of Zhejiang University:Engineering Science
基 金:天津市科技创新专项基金资助项目(07FDZDSF02100)
摘 要:基于Abaqus软件提出反分析法,利用实测的沉降数据和准确的加载信息反分析得出土体参数,用于指导人工岛的建设.在取得试验土性指标的基础上,用Abaqus计算曲线与实测沉降曲线进行比较.在施工前采用实验室测得的土体参数,利用Abaqus预测土体的沉降和孔隙水压力.根据实测数据来修正计算的土体参数的准确性.采用反分析后的土体参数预测下一个施工阶段土体的位移和孔隙水压力,重复进行此过程,直至施工完成.结合模拟计算结果与监测数据分析,进行反分析和动态设计,有效指导了该人工岛的顺利建成.A back-feed analysis method was proposed based on the software Abaqus in order to safely construct the artificial island by using measured settlement data and accurate loading information. The Abaqus calculated settlement curves were constantly fitted with the measured settlement curves based on the soil parameters. The settlement and the pore water were calculated by using Abaqus with the parameters obtained from field investigation and laboratory tests before construction. Then the measured data was used to check the accuracy of the soil parameters for calculation. The displacement and the pore water pressure were estimated at the next step with the modified parameters. This procedure was repeated until the construction was accomplished. The back-feed analysis and the dynamic design were constructed by combining the simulation results with the monitoring analysis, which effectively guided the successful completion of the artificial island.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.60