锥齿轮测量齿面接触分析方法研究  

The TCA Methods of Measured Tooth Surface of Spiral Bevel Gear

作　　者：张卫青[1] 郭晓东[1] 张明德[1] 翟庆富[1] 

机构地区：[1]重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆400050

出　　处：《机械传动》2010年第7期5-8,14,共5页Journal of Mechanical Transmission

基　　金：国家自然科学基金资助项目(50675236);国家科技支撑计划资助课题(2006BAF01B01-03);重庆市教委科学技术研究项目(KJ10086)

摘　　要：受加工误差及热处理变形等多种因素影响,锥齿轮副实际接触区形态往往与理论计算不一致。针对这一问题,提出了两种测量齿面接触分析的方法,并基于UG平台编写了实现程序。通过计算实例表明,两种方法均能较好的分析齿轮副的实际接触性能。The real tooth contact zone of spiral bevel gear is usually different with the theoretic result, effected by machining error and heat treatment distortion. In this paper, two TCA （Tooth Contact analysis） methods of measured tooth surface is putted forward. And a calculate programm is developed based on UG platform. In the end, a calculation example is carried out. The result show that both two methods can achieve the TCA of measured tooth surface.

关 键 词：锥齿轮 测量齿面 接触分析 

分 类 号：TG86[金属学及工艺—公差测量技术]