涤纶短纤维在纺程中的XRS、DMA研究  

STUDY OF XRD AND DMA ON PET FIBER DURING THE SPINNING PROCESS

作　　者：孟家明 任夕娟[1] 曾宪春[1] 胡家璁[2] 

机构地区：[1]仪征化纤股份有限公司研究院 [2]复旦大学高分子科学系

出　　处：《高分子材料科学与工程》1999年第4期113-116,共4页Polymer Materials Science & Engineering

摘　　要：应用ＦＲＳ－ＸＲＳＡ、ＳＡＸＳ、ＤＭＡ等研究了涤纶短纤维在纺丝及后处理过程中的结晶、取向与超结构的形成与变化。并讨论了涤纶纤维在后加工过程中玻璃化温度（Ｔｇ）与纤维聚集态结构的关系。ＸＲＳ结果指出，涤纶在纺丝与后处理过程中结晶分４步进行，且存在着“结构重整”现象，按两相模型考虑，晶区、非晶区均有重组。ＤＭＡ结果表明，ＰＥＴ纤维在后加工过程中具有双重玻璃化转变，在晶区、非晶区之间还存在１个“过渡相”，其高温Ｔｇ（ｕ）主要是由中介态（取向非晶）造成的。The formation and the change of crystallinity, orientation and super structure of PET fiber during the spinning process were investigated by mean of FRS XRSA, SAXS and DMA. The relation of the change of glassy transition temperature( T g) of PET fiber during the later spinning process with the multipe structure of PET fiber was also studied. The XRS result shows that the crystal of PET fiber during the spinning process if formed by four steps, and there is a phenomenon of structure reconstruction (both in crystal region and in amorphous region). The DMA result shows that PET fiber has double glassy transition. There is a transition phase between crystal region and amorphous region, and the hight temperature T g(u) is caused by this transition phase, which is a kind of orientation amorphous.

关 键 词：XRS DMA 纺丝过程 聚酯纤维 短纤维 

分 类 号：TQ342.206[化学工程—化纤工业]