环保型捆钞机送切胶机构的研究与设计  

The Design and Research of Enviroment-friendly Packing Bank Note Machine to Send and Cut Glue Mechanism

作　　者：曹巨江[1] 吕凯归[1] 王映俊 钱德明 陈均志 

机构地区：[1]陕西科技大学机电工程学院,陕西西安710021 [2]浙江温州轻工研究院,浙江温州325003

出　　处：《机械传动》2010年第12期63-65,共3页Journal of Mechanical Transmission

基　　金：温州市重大对外科技合同交流项目:绿色环保型捆扎捆钞机的研究(H20080046)

摘　　要：基于环保型捆扎纸带,设计出与之匹配的送胶、切胶机构。由于热熔胶本身厚度较小,且有弹性,如用类似于切捆扎带的刀具将其剪断,则不能顺利实现切胶。热熔胶较高温度下易发生粘结,故而出厂时在其表面附有一层防粘膜,因此,在进行粘合之前,必须设法将其去除。基于以上要求,设计出胶带的烫切机构完成切胶,可使热熔胶片在带头准确定位,实现了定点、定量上胶。而后,刀具回撤,规避了与切带、烫合等后续动作的空间干涉。Based on the paper tape of environment-friendly packing bank machine,the matched mechanism to send and cut the paper tape is designed.The hot cement is thin and elastic,using the same cutting tool as cutting paper belt can＇t snip the belt,and cut hot cement tape smoothly.The hot cement is easy to cohere in high temperature,so the release film is put on the surface before leave factory.Therefore,we must try to wipe off it before glued.According to the requirements above,scald and cut mechanism which could achieved cutting action and accurate positioning on the paper belt is designed,thus it could accomplish fixed point and fixed amount gluing.After that,the cutting tool retraced,and the interfering between cutting tool and follow-up action is avoided.

关 键 词：轻工机械 捆钞机设计 机构 环保型 

分 类 号：TH693.5[机械工程—机械制造及自动化]