提高新闻纸不透明度的方法  

The Methods of Improving Newsprint Opacity

作　　者：雷以超[1] 邓小文[1] 刘世界[1] 

机构地区：[1]华南理工大学制浆造纸工程国家重点实验室,广东广州510640

出　　处：《造纸科学与技术》2010年第6期49-51,96,共4页Paper Science & Technology

摘　　要：不透明度是新闻纸的一项重要指标。降低新闻纸的定量及提高纸张的白度,则会造成不透明度的下降。为了生产高不透明度、低定量并且白度达到65%ISO的新闻纸,可采用下述三种方法。一是在新闻纸配料中添加填料改善纸张的不透明度,填料必须具有较高的光散射能力和孔隙率,添加量较低,不同填料有不同的效果;其二是通过添加荧光增白剂来获得较高的白度而不损失不透明度;其三是当脱墨浆作为新闻纸的主要配料时,为获得较高的不透明度,建议采用较高的漂白温度,较低的pH,且在热分散或漂白后进行后浮选。Opacity is an important characteristic of newsprint.As the basis weight decreases and the brightness of the paper increases,the opacity of newsprint will inevitably reduce.In order to produce high opacity and lighter basis weight newsprint with 65%ISO brightness,three methods can be employed.First,filler can be added in the newsprint furnish to improve newsprint opacity,the filler must have high light scattering ability and high porosity,and the dosage is low.Different kinds of filler have different effects.Second,fluorescent whitening agents（FWA） are used to achieve higher brightness without loss of opacity.The third,as deinked pulp is used as the main furnish of newsprint,it is suggested that,to obtain higher opacity,bleaching temperature should be high and pH should be low,and that a post-flotation can be followed after dispersing or bleaching.

关 键 词：新闻纸 不透明度 填料 荧光增白剂 漂白 

分 类 号：TS761.1[轻工技术与工程—制浆造纸工程]