声发射监测煤矿动力灾害工艺技术研究  

Research on Technology of Acoustic Emission Monitoring Coal Mine Disaster

作　　者：吕贵春[1] 邹银辉[1] 康建宁[1] 

机构地区：[1]煤炭科学研究总院重庆研究院,重庆400037

出　　处：《地下空间与工程学报》2010年第A02期1720-1725,共6页Chinese Journal of Underground Space and Engineering

摘　　要：声发射监测工艺技术是能否准确监测煤矿动力灾害的关键技术。通过数值模拟和实验室实验的方法对波导器的直径和长度进行了优化,同时利用现场考察的方式对不同长度、直径波导器接收AE信号的效果进行了考察,确定波导器的直径为20 mm、长度应大于巷道破碎圈宽度。利用现场考察的方式对波导器的安装工艺进行了确定,波导器距离掘进工作面的距离应保持在6～25 m范围内;波导器迎向巷道掘进方向,安装仰角处于3～20°之间较为合理;波导器接收AE信号端位于破碎圈以外的原始应力区、波导器用软性材料穿套及传感器用弹性套筒保护等可以起到良好的阻噪作用。Acoustic emission monitoring technology is a key technology to monitor accurately coal mine disasters. The numerical simulation and laboratory testing methods were applied for the diameter and length of the waveguide, and the waveguides with different length and, diameter for AE signal reception are studied and it is determined that when the diameter of waveguide is 20 mm, the length should be greater than the width of roadway broken circle. The way for installation of the waveguide is determined. The distance between driving face and the guide should be maintained at range of 6 m - 25m; the waveguide is toward roadway driving direction, and the installation elevation in 3 ° to 20° is reasonable ; waveguide ＇ s AE signal reception end at the original stress area outside broken circle, materials used in protection of waveguide soft wear kits and elastic sleeve sensor can play a good role in the resistance to noise.

关 键 词：声发射 波导器 参数工艺 安装工艺 

分 类 号：TD676[矿业工程—矿山机电]