可摘局部义齿不同加载条件下的三维有限元分析  

Three-dimensional Finite Element Analysis of Three Removable Partial Dentures under Different Loading Conditions

作　　者：崔雯[1] 王冬梅[1] 王成焘[1] 黄庆丰[2] 张富强[2] 

机构地区：[1]上海交通大学生物医学制造与生命质量工程研究所,上海200240 [2]上海交通大学医学院附属第九人民医院口腔修复科,上海200011

出　　处：《上海交通大学学报》2010年第11期1588-1594,共7页Journal of Shanghai Jiaotong University

基　　金：国家自然科学基金资助项目(30530230)

摘　　要：为分析对比3种可摘局部义齿修复重建肯氏I类缺失牙列的生物力学效果,对中国力学虚拟人数据库中现有模型进行改建,以此为基础形成三臂卡环固位、RPI卡环固位和种植体支持的RPI卡环固位3种不同方案的几何及有限元模型,导入ABAQUS6.5-1完成相应有限元分析,采用垂直载荷和斜向载荷,较好地模拟了口腔咀嚼过程.分析结果表明,RPI卡环固位义齿对抗垂直载荷与斜向载荷能力均优于三臂卡环固位义齿;有种植体支持的RPI卡环固位义齿对抗斜向载荷能力优于无种植体支持的RPI卡环固位义齿.To investigate the biomechanical effects of three removable partial dentures,the 3D finite element analysis（FEA） models of the mandible with molar missing,rehabilitated using traditional,RPI and implant-supported removable partial denture,were built based on models from the Mechanical Virtual Human of China database.The FEA was conducted in ABAQUS6.5-1.Two types of forces,vertical and oblique force,were loaded on these models.The FEA results suggest that the RPI removable partial denture is more helpful than the traditional RPD against the vertical and oblique loads,and the implant-supported RPD is more helpful than the other two,especially under oblique loading.

关 键 词：肯氏I类缺失 可摘局部义齿 有限元方法 生物力学 

分 类 号：R318.01[医药卫生—生物医学工程]