旋流纺纤维输送机构与集聚机构配合研究  

Matching Study between Fiber Transport Device and Fiber Nesting Device in Turbo Spinning Frame

作　　者：朱立成[1] 高小亮[1] 赵菊梅[1] 

机构地区：[1]盐城纺织职业技术学院

出　　处：《棉纺织技术》2010年第12期20-23,共4页Cotton Textile Technology

摘　　要：探讨旋流纺纱机纤维输送机构与纤维集聚机构的配合关系。确定了旋流纺纱机纤维输送机构与纤维集聚机构配合关系中的两个角度参数,并采用单因素试验方法研究了它们对成纱质量的影响。结果表明:纤维输送机构上沿面越接近纤维集聚机构V形槽底线的切线越有利于成纱各项指标的提高;当纤维输送机构中线处纵切面略偏向纤维集聚机构V形槽的角平分线外侧时成纱质量较好。Matching between fiber transport device and fiber nesting device in turbo spinning frame was discussed. Two angle parameters in the matching devices were determined. Effect of two angle paramaters on yarn quality was studied by single factor test method. The result shows that yarn quality indexes are better when fiber transport device up edge is closed to tangent of fiber nesting device V type groove. Yarn quality are better too when midline longitudinal section is closed to angle bisector lateral of fiber nesting device V type groove.

关 键 词：旋流纺 纤维凝聚 纤维输送 角度 强力 耐磨 毛羽 

分 类 号：TS103.27[轻工技术与工程—纺织工程]