胶晶/嵌段共聚物双重模板制备多级孔材料  

Preparation of Trimodal Macro-meso-microporous Aluminosilicates by Colloidal Crystal/P123 Dual Templates

作　　者：宋伟娟[1] 刘洪涛[1] 王坤[1] 曹进 徐春艳[1] 张泽廷[1] 

机构地区：[1]北京化工大学化工资源有效利用国家重点实验室,北京100029 [2]中国石油润滑油公司华东润滑油销售分公司,上海200122

出　　处：《无机材料学报》2010年第2期163-167,共5页Journal of Inorganic Materials

基　　金：国家自然科学基金(20606003);中国石油科技创新基金(2008D-5006-04-05);北京化工大学青年教师基金(QN0726)

摘　　要：采用分段乳液聚合法和无皂乳液聚合法制备了聚苯乙烯（PS）微球,以此单分散胶态晶体和嵌段共聚物P123为模板剂,通过Y型分子筛前驱体的填充和模板剂的去除制备了具有大-介-微多级孔的材料.采用XRD、SEM和TEM等手段表征了PS微球及多级孔材料.结果表明,分段乳液聚合可以制备平均粒径为50nm的PS微球,无皂乳液聚合可以制备450nm左右的PS微球;以其作为大孔模板剂分别考察了PS微球粒径、模板剂用量、水用量等因素对多级孔材料合成的影响,结果表明,PS微球的粒径越大,材料中大孔的分散性越好.合成多级孔材料的条件为：PS微球乳液与前驱体的比值（质量比）为1.0~0.5,水与前驱体的比值为7.5,P123与前驱体的比值为0.1.Polystyrene（PS） microspheres with average diameter of 50nm and 450nm were prepared by step emulsion polymerization and emulsifier-free emulsion polymerization,respectively.On the basis of this,aluminosilicates with macro-meso-micropores were synthesized via in-situ assembly of Y zeolite precursors by PS microspheres/P123 dual templates.The materials with macro-meso-micropores were characterized by means of XRD,SEM and TEM.The results showed that PS microspheres with the diameter of 50nm and 450nm can be obtained by step emulsion polymerization and emulsifier-free emulsion polymerization,respestively.Moreover,influence of various factors including diameters of PS microspheres,amount of templates,and amount of water on the synthesis of the macro-meso-microporous materials were systematically investigated.It was concluded that the composites synthesized by PS microspheres with the larger diameter contained more dispersed macropores.The optimum conditions for aluminosilicates preparation were found to be PS/precursors ratio of 1-0.5,water/precursors ratio of 7.5,and P123/precursors ratio of 0.1.

关 键 词：多级孔材料 胶晶 嵌段共聚物 组装 表征 

分 类 号：O643[理学—物理化学]