检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邱海鸥[1] 宋虎跃[2] 汤志勇[1] 徐国栋[1,3] 孙文[1,4]
机构地区:[1]中国地质大学材料科学与化学工程学院,武汉430074 [2]中国地质大学生物地质与环境地质教育部重点实验室,武汉430074 [3]成都地质矿产研究所分析测试中心,成都610082 [4]武汉市产品质量监督检验所,武汉430048
出 处:《地质科技情报》2010年第6期118-120,共3页Geological Science and Technology Information
基 金:中国地质调查局项目(2006010028);国家自然科学重点基金项目(40830212)
摘 要:提出了超声波提取-火焰原子吸收光谱法测定灰岩中Fe(Ⅱ)的方法,通过对总铁含量进行测定,采用差减法计算Fe(Ⅲ)的含量,从而实现了灰岩中铁的价态分析。探讨了Al2(SO4)3溶液选择性提取岩石样品中微量Fe(Ⅱ)的化学条件及其他仪器参数。结果表明,20-30℃下,0.025 mol/L Al2(SO4)3在土液比1∶300、提取时间1 h条件下可有效提取碳酸盐相中Fe(Ⅱ)离子。该方法用于国家一级标准物质中Fe(Ⅱ)和Fe(Ⅲ)的测定,测定结果与推荐值吻合。运用本法对实际地质样品中的总铁和Fe(Ⅱ)进行分析测定,加标回收率分别为96.07%-103.23%,95.79%-102.11%。This paper has established a ultrasonic method for the selective extracting of the Fe(Ⅱ) in limestone by aluminum sulfate solution.The amount of the Fe(Ⅱ) and total iron were determined by flame atomic absorption spectrometer,and the amount of the Fe(Ⅲ) is the subtraction of the total iron and the Fe(Ⅱ).The experiment conditions and parameters of the apparatus were optimized.The results showed that 0.025 mol/L aluminum sulfate solution can extract effectively the trace ferrous for 1h under soil liquid ratio 1∶300 at the temperature of 20—30℃.This method was used for the speciation of Fe(Ⅱ) and Fe(Ⅲ) in National Standard Reference limestone samples and the results are in agreement with certified values.The method applied to the determination of total Fe and Fe(Ⅱ) in the geological samples,yielded the recoveries of standard solution addition up to 96.07%-103.23% and 95.79%-102.11%.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145