基于Goupillaud模型的钻柱波数值模拟和信号分析方法  

Numerical simulation and signal analysis of the drillstring wave based on Goupillaud model

作　　者：吴何珍[1] 葛洪魁[1] 崔士波 韩来聚[3] 魏茂安[3] 

机构地区：[1]中国地震局地球物理研究所,北京100081 [2]中国石油化工股份有限公司石油勘探开发研究院,北京100083 [3]中国石油化工集团公司胜利石油管理局钻井工艺研究院,山东东营257017

出　　处：《石油物探》2010年第6期540-545,共6页Geophysical Prospecting For Petroleum

基　　金：国家高技术研究发展计划(863)项目(2006AA06A108);中国地震局地球物理研究所中央级公益性科研院所基本科研业务专项(DQJB09A01)共同资助

摘　　要：基于传递矩阵可以用一系列反射系数来表示整个钻柱,而钻柱顶端接收的钻柱波信号含有与这些反射系数相关的信息。基于钻柱模拟实验数据,利用盲源反褶积进行反射系数计算,将截取的输入子波与反射系数褶积,得到了模拟输出信号。结果表明,模拟输出信号与实际采集的信号相关度较高。运用该方法对随钻地震参考信号进行了处理,达到了强化钻头源信号的目的。Based on transfer matrix,the whole drillstring can be expressed by reflection coefficients.The drillstring wave signals measured at the drillstring top contains the information related to the reflection coefficients.Based on the drillstring simulated experimental data,the reflection coefficients was calculated by using blind deconvolution. We got simulated output signal by the convolution of intercepted input wavelet and reflection coefficient.The result shows that the correlation of the simulated signal and the actual signal is very high.The method was used to process seismic while-drilling reference signals,and the source signals were strengthened.

关 键 词：钻柱波 传递矩阵法 Goupillaud模型 盲源反褶积 

分 类 号：P631.4[天文地球—地质矿产勘探]