检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]浙江科技学院轻化工程系,浙江杭州310023
出 处:《化工学报》2011年第1期66-70,共5页CIESC Journal
基 金:浙江省科技计划重点项目(2006C21058);浙江省高等学校创新团队(T200918);浙江省高等学校优秀青年教师资助项目~~
摘 要:In order to study the penetration depth and the spread width in a transverse jet, a flow-visualization based experimental setup was built.A phase tunable laser and CCD system was employed, and several jet to crossflow velocity ratio (r=2, 4, 8, 12, 16) were investigated.Experimental results showed that the jet to crossflow velocity ratio is the key parameter to control the penetration depth and the blending law of the jet, and that larger jet to crossflow velocity ratio resulted in much deeper penetration depth.The experimental data agreed well with the previous reports, and predicting formula was derived as the fitting equation y/rd=1.3615(x/rd)0.5608 with the correlation coefficient R=0.9996.On the other hand, the larger jet to crossflow velocity ratio is not the greater access to the spread width, and in this work, the case of r=8 obtained the largest spread width, and the spread width remains relatively large in a large penetration zone.In order to study the penetration depth and the spread width in a transverse jet, a flow-visualization based experimental setup was built.A phase tunable laser and CCD system was employed, and several jet to crossflow velocity ratio (r=2, 4, 8, 12, 16) were investigated.Experimental results showed that the jet to crossflow velocity ratio is the key parameter to control the penetration depth and the blending law of the jet, and that larger jet to crossflow velocity ratio resulted in much deeper penetration depth.The experimental data agreed well with the previous reports, and predicting formula was derived as the fitting equation y/rd=1.3615(x/rd)^0.5608 with the correlation coefficient R=0.9996.On the other hand, the larger jet to crossflow velocity ratio is not the greater access to the spread width, and in this work, the case of r=8 obtained the largest spread width, and the spread width remains relatively large in a large penetration zone.
分 类 号:TK229[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249