射流曝气MBR处理啤酒废水的试验  

Treatment of Brewery Wastewater in Jet-aeration Membrane Bioreactor

作　　者：陈宇[1] 李勇[1] 

机构地区：[1]苏州科技学院环境科学与工程学院,江苏苏州215011

出　　处：《工业安全与环保》2011年第1期7-9,共3页Industrial Safety and Environmental Protection

基　　金："十五"国家重大科技水专项"苏州市城市水环境质量改善技术研究与综合示范"(2003AA601070);建设部科技计划项目"改进膜生物反应器的试验研究"(05-K2-1)

摘　　要：射流曝气提高了系统的氧利用效率及传质效率。通过逐渐提高进水的容积负荷来考察系统的处理效果,试验表明,利用射流曝气MBR处理模拟啤酒废水是可行的,系统对COD、氨氮、浊度平均去除率为95.74%,97.84%,99.5%。由于系统运行期间不排泥,因此系统对PO43-的去除效果不佳,平均去除率为42.9%。膜对COD及氨氮的去除率分别为9.43%～13.59%和3.08%～14.67%。Jet - aeration improves the efficiency of oxygen utilization and mass transfer. The removal of pollutants are studied by gradually increasing the volume load. The results indicate that brewery wastewater can be treated in a jet - aeration membrane bioreaetor, and the average removal rate of COD, NH4 ＋ - N and turbidity is 95.74%, 97.84 % and 99.5 % respectively. In the condition of no sludge discharge during operation, the removal rate of PO4 3- is low and the average removal efficiency is 42.9%. The removal of COD and ammonia nitrogon by membrane itsdf is 9.43% - 13.59% and 3.08% - 14.67% respectively.

关 键 词：膜生物反应器 射流曝气 啤酒废水 

分 类 号：X703[环境科学与工程—环境工程]