树脂模压固化工艺对碳纤维纸性能的影响  

Effect of Resin Molded Curing Process on the Performance of Carbon Fiber Paper

作　　者：梁云[1] 孙励志[1] 胡健[1] 

机构地区：[1]华南理工大学制浆造纸工程国家重点实验室,广东广州510640

出　　处：《中国造纸》2010年第12期19-22,共4页China Pulp & Paper

摘　　要：碳纤维纸制备过程中的树脂模压固化工艺对碳纤维纸的性能起着至关重要的作用,本实验主要就树脂模压固化时间、固化压力等工艺对纸张性能的影响进行了研究。结果表明,在实验条件下,模压固化时间为2h、压力为4MPa时,碳纤维纸的综合性能较优,与商品样相比,厚度、密度、透气性能相当,强度性能和导电性能要略高于商品样。The molded curing process plays an important role in the properties of carbon fiber paper.The effects of the resin molded curing times and molded curing pressure on the performances of carbon fiber paper are discussed in this paper.The results showed that the optimum curing time is 2 h under the 4 MPa pressure.Compared with the commercial carbon fiber paper,the self-made samples have similar thickness,density and porosity,and a little higher tensile index and conductivity.

关 键 词：碳纤维纸 树脂 模压固化时间 模压固化压力 

分 类 号：TM911.4[电气工程—电力电子与电力传动]