检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国石化胜利石油管理局,山东东营257000 [2]中国石化胜利石油管理局钻井工艺研究院,山东东营257017
出 处:《石油钻探技术》2010年第6期29-32,共4页Petroleum Drilling Techniques
基 金:中国石化集团公司重点攻关项目"长水平段水平井钻井技术研究"(编号:P07049)部分研究成果
摘 要:胜利油田高平1井完钻井深4 535.00 m,水平位移3 814.33 m,垂深948.87 m,位垂比4.02,是目前国内陆上油田位垂比最大的大位移水平井。该井在钻井过程中存在浅层定向造斜不易控制、技术套管下入困难、水平段滑动钻进加压困难、井眼轨迹控制要求高、井壁稳定及安全钻进对钻井液性能要求高等技术难点,为此,采取了优化钻井设计、优选大角度单弯动力钻具、应用高性能乳化防塌润滑钻井液体系、优选钻具组合、应用LWD控制井眼轨迹、采用复合钻进等工程技术措施,有力地保证了该井的顺利完钻。详细介绍了该井的设计与施工情况。Well Gaoping 1,which is located in Shengli Oilfield with total depth of 4 535 m,horizontal displacement of 3 814.33 m and vertical depth of 948.87 m,is an onshore extended-reach horizontal well with the biggest ratio of displacement and true vertical depth(4.02).There are several challenges during drilling,such as trajectory control in shallow formation,intermediate casing setting,weight adding on bit during slide drilling in horizontal section,well trajectory control,wellbore stabilization and drilling fluids quality for safe drilling.A series of measures were used to ensure the success of this well including the optimization of large angle down-hole motor and drilling assembly,adoption of high-performance caving-prevent emulsified lubricant drilling fluid system,using LWD for well trajectory control and composite drilling.The detailed information of design and drilling of this well was described.
分 类 号:TE243[石油与天然气工程—油气井工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200