基于有限差分法的轿车助力转向泵壳体金属型铸造的模拟及生产验证  

Simulation and Production Validation for Metal Mold Casting of Car's Power Steering Pump Shell Based on Finite Difference Method

作　　者：黄放[1] 潘粉华[1] 罗湛[1] 冯睿[1] 蒙祥伟 

机构地区：[1]贵州大学机械工程学院,贵州贵阳550003 [2]贵州红林通诚机械有限公司,贵州贵阳550009

出　　处：《铸造》2010年第12期1311-1314,共4页Foundry

基　　金：贵州省科技计划项目(黔科合GY字[2009]3020)

摘　　要：以有限差分法作为铸造工艺模拟研究的理论平台,利用相关模拟软件预测出转向泵铸件在浇注过程中可能出现的裹气、缩松、缩孔等缺陷,并在此基础上,结合转向泵铸件结构特点及生产实际优化铸造工艺、改进模具结构,通过理论分析与生产验证,最终获得了合格铸件。Finite difference method is used as a theory platform,using some relevant software to investigate the casting process.It was used to simulate and predict possible defects like gas trapping,shrinkage,dispersed shrinkage and so on that could occur in the casting process.Based on this analysis result,and combined with steering pump casting structure and actual production the casting process was optimized and the die structure was improved.Through theoretical analysis and production validation,finally the satisfied castings were obtained.

关 键 词：有限差分法 模拟 铸造工艺 转向泵铸件 

分 类 号：TG249.3[金属学及工艺—铸造] U463.43[机械工程—车辆工程]