检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:栾茂田[1] 刘功勋[1,2] 郭莹[1] 王忠涛[1]
机构地区:[1]大连理工大学土木工程学院海岸和近海工程国家重点实验室,辽宁大连116024 [2]中交上海航道勘察设计研究院有限公司中交疏浚技术重点实验室,上海200120
出 处:《水利学报》2010年第12期1407-1415,共9页Journal of Hydraulic Engineering
基 金:国家自然科学基金重点基金资助项目(50639010);国家自然科学基金资助项目(50909014)
摘 要:利用土工静力-动力液压三轴-扭转多功能剪切仪,对取自于长江口原状淤泥质软黏土,在不固结不排水条件下,分别进行了动三轴、45°线耦合以及圆耦合等多种复杂循环剪切试验及循环荷载作用后静三轴试验。结果表明,随着循环次数的增加,3种不同模式循环荷载作用产生的应变、孔压增量以及循环荷载作用后土的静强度衰减程度差异均变得越来越明显。对应相同循环剪切次数,双向耦合循环剪切要大于单向循环剪切产生的应变与孔压增量,双向耦合循环剪切后静强度衰减更加明显;而对于双向耦合循环剪切,圆耦合循环剪切大于45°线耦合循环剪切产生的应变与孔压增量,并且圆耦合循环剪切后静强度衰减更加显著。由此表明,主应力轴连续旋转会使土体产生更大的变形与孔压增量,并且使静强度显著降低。分别定义了广义综合剪应变及综合孔压增量比,并建议了循环荷载作用后静强度与广义综合剪应变、综合孔压增量比的关系。Using the geotechnical static and dynamic universal triaxial and torsional shear apparatus, the undisturbed silty soft clay in the Yangtze estuary is tested under unconsolidated-undrained conditions, with the dynamic triaxial, 45° line coupling/circle coupling complex cyclic shear tests and the static triaxial tests after cyclic loadings. It is found that the differences of the strains and the pore water pressure increments caused by three different modes of cyclic loadings become more pronounced with an increase of the number of cycles as well as the degradation degrees of static shear strength after cyclic loadings. After the same number of cyclic shear, the strain and pore water pressure increment caused by bidirectional coupling cyclic shear are larger than those caused by mono-directional cyclic shear and the degradation degree of static shear strength after bidirectional coupling cyclic shear become more evident. As for bidirectional coupling cyclic shear, the strain and pore water pressure increment caused by circle coupling cyclic shear are larger than those caused by 45° line coupling cyclic shear and the degradation degree of static shear strength after circle coupling cyclic shear is more significant. This indicates that continuous rotation of principal stress direction makes larger strain and pore water pressure increment and reduces the static shear strength remarkably. The generalized synthetic shear strain and the synthetic pore water pressure incremental ratio are defined respectively and the relationships between static shear strength and generalized synthetic shear strain, shear strength and synthetic pore water pressure incremental ratio are proposed.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222