复合缺陷型电磁帯隙谐振腔  

Composite defect electromagnetic band gap cavity

作　　者：柏宁丰[1] 洪玮[1] 孙小菡[1] 

机构地区：[1]东南大学电子器件与系统可靠性研究中心,南京210096

出　　处：《物理学报》2011年第1期751-757,共7页Acta Physica Sinica

摘　　要：提出了一种复合缺陷型电磁带隙(EBG)谐振腔,通过对该EBG结构的带隙分析,指出该谐振腔可在大尺寸下实现单模工作,提供更大的容差空间,且具有高Q值.数值模拟结果表明,基于复合缺陷EBG结构构成的谐振腔,单模工作条件可以放宽到外圈金属柱直径与周期之比为0.6,内圈金属柱直径与周期比为0.9;而传统中心缺陷型EBG结构的小于0.3.We demonstrate an approach to create a high Q factor two-dimensional （2D） electromagnetic band gap （ EBG） structure with composite defects in the center of the structures. By theoretical calculation,we show that a single-mode 2D EBG structure can be created with different ratios of diameter,d,to the lattice period,Λ,in this structure. This structure can achieve high Q factor and single mode operation with large d/Λ of the defect at the first circle around the removed rod in the center. With our structure,the single mode operation can be achieved within d/Λ 0. 9 at the defect rods and d/Λ 0. 6 at the others. In comparison,the condition of d/Λ 0. 3 should be strictly satisfied for the traditional design. These results provide very important guidelines for designing of the 2D EBG structure which can be used in traveling-wave tube device.

关 键 词：电磁带隙 复合缺陷 谐振腔 单模 

分 类 号：O483[理学—固体物理]