基于光电缆的分布式温度传感网络的实验研究  

Experiment Research of Distributed Temperature Sensing Network Based on the Optical Cable

作　　者：张燕君[1,2] 苏玉玲[1] 韦波[1] 黄保凯[1] 毕卫红[1] 

机构地区：[1]燕山大学信息科学与工程学院,河北秦皇岛066004 [2]海湾安全技术有限公司,河北秦皇岛066004

出　　处：《光电工程》2011年第1期49-54,共6页Opto-Electronic Engineering

基　　金：河北省人力资源和社会保障厅项目"基于FPGA的分布式光纤光栅温度监控系统";河北省自然科学基金项目"高分辨力显微热成像系统研究"(F2010001268);河北省科学技术研究与发展计划项目"传感光电缆的开发与应用"资助(10213509D)

摘　　要：本文提出增加一根光纤光栅与光电缆绕制在一起,用于监测电缆中的实时温度。采用有限元分析方法,建立了光电缆温度场模型。使用可调谐脉冲激光为光源,在一根光纤上刻制多个相同中心波长的布拉格光栅,即采用全同光栅作为系统的温度传感器,当光电缆线路中温度发生异常时,反射回来的光栅中心波长发生偏移,通过检测反射光中心波长发生的偏移量可以确定光栅温度变化的大小。不同位置的光栅返回光信号所需的时间不同,通过检测和计算光返回的不同时间,可以计算出发生温度变化的光栅位置。实验结果表明,光栅的温度敏感性可以达到11.4pm/℃,光栅的测量温度与实际温度的误差在3%范围内。A Fiber Bragg Grating （FBG） is increased in the optical cables, which can be used for monitoring the cable real-time temperature. Finite-element method is used to establish the temperature field model of optical cables. The tunable laser was used as source, and some fiber Bragg gratings with same center wavelength were used as system temperature sensor. In optical cable lines when the temperature is abnormal, the reflected grating center wavelength will shift. By detecting the center wavelength offset of the reflected light, the size of the grating temperature change can be determined. Grating at different positions reflected optical signals needs different time. By detecting and calculating the interval time of reflected light, the location and the temperature of the grating whose temperature has changed will be obtained. Experimental results show that grating temperature sensitivity reaches 11.4 pm/℃. The deviation between the measured temperature and the actual temperature is within 3% range.

关 键 词：布拉格光纤光栅 光电缆 可调谐脉冲激光器 有限元 温度场 

分 类 号：TN247[电子电信—物理电子学]