蓄电池板栅连铸机输铅管结构设计  

Design of pipe conveying liquid lead of battery grids continuous casting machine

作　　者：李万全[1] 高长银[2] 刘江[1] 

机构地区：[1]重庆三峡学院,重庆404000 [2]郑州航空工业管理学院,郑州450015

出　　处：《现代制造工程》2011年第1期128-129,66,共3页Modern Manufacturing Engineering

基　　金：重庆市科技攻关重点项目(CSTC;2009AB3058);河南省科技发展计划项目(092102210093);重庆市高校优秀成果转化项目(kjzh08215);重庆三峡学院资助项目(09ZZ-065)

摘　　要：针对蓄电池板栅连铸连轧供铅管路进行了研究。根据蓄电池板栅连铸机对铅液的温度要求,考虑保温和加热两个方面的问题,设计了可满足板栅连铸机使用要求的输铅管路。同时设计了一种铅液流动压力稳定机构,该机构由一个压力衰减室和两个管接头组成,可以有效地减小铅液流动过程中形成的压力波动,提高蓄电池产品质量。The method to convey liquid lead to continuous casting machine for battery grids is studied. According to the liquid lead temperature meeting requirement of continuously easting,a pipe conveying liquid lead that could be using in continuous casting machine is designed, considering the effects of heating and insulation. And a mechanism of stabilizing pressure liquid lead is presented, that consisting of a pressure wave reduction chamber and two pipe joints. The mechanism can reduce the pressure fluctuation effectively, and the quality of grids is improved.

关 键 词：板栅 连铸 输铅管 温度 压力 

分 类 号：TF806.1[冶金工程—有色金属冶金]