苜蓿干燥与茎叶分离设备设计与CFD模拟  

Design and CFD Simulation of Quad-pass Rotary Drum Dryer-separator

作　　者：宁国鹏[1] 王德成[1] 王光辉[1] 罗小燕[1] 李强[1] 

机构地区：[1]中国农业大学工学院,北京100083

出　　处：《农业机械学报》2011年第1期84-89,133,共7页Transactions of the Chinese Society for Agricultural Machinery

基　　金："十一五"国家科技支撑计划资助项目(2006BAD11A0902)

摘　　要：设计了滚筒式苜蓿干燥与茎叶分离设备,可在完成干燥的同时实现茎叶分离加工。采用预干燥滚筒与三回程干燥滚筒的组合结构,可实现苜蓿茎、叶的均衡干燥。利用CFD方法对设备内部的空气流场进行了仿真模拟,可以看出流场的风速分布反映了设备的结构特点,且不存在明显的涡流现象,能够满足输运物料、均衡干燥和茎叶分离的要求。风门开启面积对分离室内的风速影响显著,并且呈现出一定的规律。根据模拟结果可得,满足茎叶分离风速条件的风门最佳开启面积为(150×150)^(200×150)mm2。For the sake of achieving uniform drying and separation of alfalfa leaves and stems in one process,a quad-pass rotary drum dryer-separator was designed,which mainly comprised the pre-drying,quick-drying,tempering and separating zones.The air flow in the dryer-separator was simulated by using CFD method with applying the standard k-ε model,and the effect of different opening areas of the adjusting gate on the velocity in the separating chamber was analyzed emphatically.It was found that the desired velocity for leaf-stem separation in the separating chamber was gained,when the opening area of the adjusting gate was（150×150）^（200×150）mm2.

关 键 词：苜蓿 干燥 茎叶分离 设计 数值模拟 

分 类 号：S226.6[农业科学—农业机械化工程] S54[农业科学—农业工程]