聚硅酸氯化铝锌絮凝剂的制备及在含油废水处理中的应用研究  

Synthesis and application of PAZSC in oily wastewater treatment

作　　者：丛丽娜[1] 刘艳娟[1] 郝斌[1] 

机构地区：[1]唐山学院环境与化学工程系,河北唐山063000

出　　处：《化学工程师》2011年第1期5-9,共5页Chemical Engineer

基　　金：唐山市科技局研究与发展计划课题(08160202A-21)

摘　　要：在常温常压下,利用硅酸钠、AlCl3及ZnCl2制备出一种新型的无机高分子复配絮凝剂——聚硅酸氯化铝锌(PAZSC),并对含油废水进行了絮凝实验,确定出水处理中最佳絮凝条件:最佳投药量为35mL,最适宜的pH值范围为7～8,Zn/Al/Si的最佳摩尔比为1∶1∶2。此时的浊度去除率98.9%,色度去除率91.3%,COD的去除率约71.8%。并与PASC进行了对比试验,结果表明,PAZSC的性能优于PASC。A novel inorganic polymer composite flocculant——PAZSC（poly-aluminum zinc silicate chloride） is synthesized by sodium silicate,aluminum chloride and zinc chloride under normal temperature and pressure.Then the oily waste water is tested.The best flocculation condition is determined that the optimal dosage is 35mL,the most suitable range of pH is 7～8,and the best mole ratio of zinc,aluminum and silicon is 1：1：2.At this time the removal rates of turbidity is 98.9%,the removal rates of chromaticity is 91.3%,and the removal rates of COD is 71.8%.The check experiment of PASC is done,and the results indicate that the properties of PAZSC are superior to that of PASC.

关 键 词：复配絮凝剂 聚硅酸氯化铝锌 含油废水 无机絮凝剂 

分 类 号：X703.5[环境科学与工程—环境工程]