基于Isight硫化罐卡箍的结构优化设计  

Structural Optimization Design of Autoclave Clamp under Isight

作　　者：周国发[1] 于继凯[1] 郭吉林[2] 

机构地区：[1]南昌大学环境与化学工程学院,江西南昌330031 [2]台州市特种设备监督检验中心,浙江台州318000

出　　处：《南昌大学学报（工科版）》2010年第4期359-364,共6页Journal of Nanchang University(Engineering & Technology)

基　　金：国家自然科学基金资助项目(20274016);江西省教育厅科技攻关资助项目(S00123)

摘　　要：应用CAE软件Proe、Ansys和协同优化设计软件Isight,构建了基于Isight的协同优化设计平台,利用这一平台并基于分析设计的思想,完成了对硫化罐卡箍的结构优化设计。研究表明:在不增加硫化罐卡箍质量的前提下,通过改进其结构参数可以显著改善卡箍的受力状况,最大当量应力可由213.05 MPa降至148.349 MPa,降幅达30.37%,从而为硫化罐卡箍的轻量化设计提供了依据。CAE software Proe,Ansys and collaborative optimization and design software Isight are used to build collaborative optimization design platform based Isight,and this platform is used to complete the structural optimization design of the autoclave clamp based on the idea of analysis design successfully.Research shows that the stress state of the autoclave clamp can be greatly improved by improving its structural parameters without increasing mass,the maximum equivalent stress can be dropped from 213.05 MPa to 148.349 MPa and the reduce rate is up to 30.37%,which supports the basis for autoclave hoop＇s lightweight design.

关 键 词：协同优化设计 Isight集成 硫化罐卡箍 结构优化 

分 类 号：TQ051.02[化学工程]