水性聚氨酯路标涂料研制  

Research and Preparation of Waterborne Polyurethane Road Mark Coatings

作　　者：吴明江[1] 阮家声[1] 王雪琴[1] 蔡彦[1] 左向阳[1] 李亚勇[1] 

机构地区：[1]航天科技集团公司四院四十二所,湖北襄樊441003

出　　处：《化学推进剂与高分子材料》2011年第1期61-63,共3页Chemical Propellants & Polymeric Materials

摘　　要：以聚己二酸丁二醇酯二醇(PBA)、二羟甲基丙酸(DMPA)和甲苯二异氰酸酯(TDI)等为主要原料,配合防老剂和紫外光吸收剂,用预聚体法制备不挥发物质量分数为40%的单组分水性聚氨酯树脂;以此树脂为基础,用钛白粉作为着色剂,制备白色水性聚氨酯路标涂料。研究结果表明,预聚体法制备的水性聚氨酯树脂在40℃下放置24 h即可达到最终性能;水性聚氨酯树脂在水中呈柱状分散;以此树脂制备的水性聚氨酯路标涂料附着良好,表干时间短,各项指标符合路标涂料技术标准。One-component waterborne polyurethane resin with mass fraction of 40% non-volatile substance was prepared by prepolymer method using polybutylene glycol adipate（PBA）,dimethylolpropionic acid（DMPA） and toluene diisocyanate（TDI） etc as main raw materials combined with antioxidants and UV absorbents.The white waterborne polyurethane road mark coatings were prepared based on the above resin using titanium pigment as coloring agent.The research results show that the final performance for waterborne polyurethane resin prepared by prepolymer method can be obtained after 24h at 40℃;waterborne polyurethane resin dispersed in water like a column;the waterborne polyurethane road mark coatings based on the above resin have good adhesion performance,short surface dry time,and all indexes accord with the technical specifications of road mark coatings.

关 键 词：水性聚氨酯 预聚体 路标涂料 

分 类 号：TQ630.7[化学工程—精细化工]