检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:梁李斯[1] 姚广春[1] 穆永亮[1] 华中胜[1]
机构地区:[1]东北大学材料与冶金学院,辽宁沈阳110819
出 处:《东北大学学报(自然科学版)》2011年第1期114-116,132,共4页Journal of Northeastern University(Natural Science)
基 金:国家高技术研究发展计划项目(2008AA032512);国家自然科学基金资助项目(50774021)
摘 要:为更全面地反映闭孔泡沫铝材料的吸声降噪能力,从密度、厚度、背后空腔深度、打孔率几个方面,对闭孔泡沫铝材料的吸声性能进行研究.改变以往单纯用吸声系数的峰值表征的方法,而是用吸声系数的峰值、降噪系数、半峰宽3个指标来评价闭孔泡沫铝材料的吸声性能.通过驻波管法测试吸声系数,用Origin软件进行吸声曲线的分析,建立一次函数.结果表明:在以往研究中个别吸声系数的峰值较高的样品,整体吸声效果不佳;而一些吸声系数的峰值处于中等水平的却具有较好的整体吸声效果,因此更适合于在实际应用中用于吸声结构的设计.The sound absorbility of closed-cell aluminum foam was further investigated in view of some factors,including density,thickness,back cavity depth and perforation rate.Instead of the only characteristic factor,i.e.,the peak value of sound absorption coefficient,the sound absorbility of closed-cell aluminum foam was therefore evaluated through three indices,i.e.,the peak value above mentioned,denoising coefficient and half peak width.With the sound absorption coefficient measured by standing-wave meter and the sound absorption curves analyzed by the software Origin,the corresponding functional relation was established.The results showed that in previous tests some specimens showed unfavorable effect of sound absorption as a whole though their peak values of sound absorption coefficient were high,while the other samples showed high sound absorption effect as a whole though their peak values were medium.So,the new method proposed to evaluate the sound absorbility is more actual and suitable for the design of sound absorption system.
分 类 号:TB34[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.233