检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张红艳[1] 白长青[2] 王文进[3] 余梁蜀[3]
机构地区:[1]长安大学,西安710064 [2]西安交通大学,西安710049 [3]西安理工大学,西安710048
出 处:《应用力学学报》2010年第4期709-715,共7页Chinese Journal of Applied Mechanics
基 金:陕西省自然科学基金(2009JQ1008);中央高校基本科研业务费专项资金
摘 要:针对土石坝静力分析中常见的三种本构模型,即Duncan E-μ、Duncan E-B和双屈服面模型是。以沥青混凝土心墙土石坝为研究对象,建立了心墙坝的三维有限元模型,并考虑了沥青混凝土心墙和过渡料、混凝土基础间的接触关系,采用接触单元模拟相互间的变形和应力协调,对心墙和坝体的变形和应力应变特性进行了分析对比。分析结果表明对于坝体应力,三种模型计算结果无论是极值还是分布都比较一致。对坝体和心墙变形,三种模型的沉降量分布是一致的,但Duncan E-μ和E-B模型求得的最大沉降量更接近实际观测值;在心墙应力分析中,双屈服模型的计算结果比较均匀合理。Duncan E-μ model,Duncan E-B model and the double-yield-surface model are three major constitutive models in the static analysis of earth-rockfill dam.In this paper,an actual asphalt concrete core-wall dam in a hydraulic engineering is employed to compare the three models.The three-dimensional finite element model of the core-wall dam is presented.The contact relations between the core-wall and the transition material and foundation of dam are taken into account using the contact element which can simulate the interdependence of deformation and force.Numerical results show that both the stress extremum and stress distribution of dam body via three different models are coincident one another.In the deformation analysis of dam body and core-wall,it is found that the maximum values of sedimentation via Duncan E-μ model and Duncan E-B model,which are greater than the value via double-yield-surface model,are close to the practical test data though the deformation distribution via three models are in good agreement.The analysis results of core-wall stress via double-yield-surface model are more reasonable than the ones based upon other two models.
关 键 词:土石坝 沥青混凝土心墙 本构模型 Duncan模型 双屈服面模型
分 类 号:TV641.41[水利工程—水利水电工程] TV312
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249