三元共聚聚酰亚胺初生纤维结构与性能的研究  

Study on the Structure and Properties of Ternary as-spun Co-polyimide Fibers

作　　者：黄忠[1] 向红兵[1] 陈蕾[1,2,3] 于俊荣[1,2,3] 诸静[1,2,3] 胡祖明[1,2,3] 

机构地区：[1]东华大学材料科学与工程学院,上海201620 [2]东华大学纤维材料改性国家重点实验室,上海201620 [3]东华大学化学纤维研究所,上海201620

出　　处：《高科技纤维与应用》2010年第5期37-40,共4页Hi-Tech Fiber and Application

摘　　要：以BTDA-TDI/MDI(P84)三元共聚聚酰亚胺(PI)粉末为原料,采用湿法纺丝技术制备BTDA-TDI/MDI三元共聚PI初生纤维,并对其结构和性能进行表征。实验结果表明:三元共聚PI初生纤维的最高抗断裂强度为0.65 cN/dtex;纺丝浆液PI质量分数19%时所得初生纤维表面较光滑;凝固浴溶液NMP质量分数70%时初生纤维结晶度分别比质量分数60%和80%时结晶度大;不同NMP质量分数凝固浴溶液所得初生纤维的热稳定性相差不大。Using BTDA-TDI/MDI（P84） co-polyimide powers as material,BTDA-TDI/MDI co-polyimide as-spun fibers were produced by wet spinning process and its structure and properties were characterized.The results showed that the highest breaking strength of as-spun co-polyimide fibers was 0.65 cN/dtex.When the concentra-tion of spinning dope was 19 wt%,the surface of the as-spun fibers was smooth relatively.NMP was adopted as coagulant.It was found that the crystallization degree of as-spun fibers derived from 70 wt% of concentration of coagulation bath was higher,compared with 60 wt% and 80 wt%.The thermal stability of as-spun fibers derived from different concentration of coagulation bath was almost the same.

关 键 词：聚酰亚胺 初生纤维 结构 性能 

分 类 号：TQ342.1[化学工程—化纤工业]