棒材厂二作业区中轧机前输送辊道的改造  

Reformation of Frontal Middle Rolling Mills of Middle Rolling Mills in Bar ＆ Wire Mill No.2 Working Area

作　　者：王春林 余富春 

机构地区：[1]棒线厂

出　　处：《昆钢科技》2010年第6期44-47,共4页

摘　　要：由于650生产线产量的不断提高，中轧机前输送辊道暴露出一些缺陷，导致辊道故障不断，造成辊子和直联减速机的频繁损坏，严重制约看生产。通过重新设计电机直联减速机的固定方式和减速机与辊子的联接方式，直联减速机选型等，解决了辊道的设备故障和隐患。As well as the output of 650 production line got higher, the shortages of middle rolling mills frontal roll gang were discovered,which made the roller bed failure appeared frequently,and rollers and direct-connected reducer often were damaged,and it became the limited condition of production.By redesigning the fixed mode of direct-connected reducer ,the coupling mode of reducer and rollers,to choose a new type of direct-connected,the hidden troubles of equipment are eliminated

关 键 词：中轧机 前输送辊道 改造 直联减速机 联轴器 

分 类 号：TG333.3[金属学及工艺—金属压力加工]