不锈钢冶炼粉尘预还原实验研究  

Experimental Study on Pre-reduction of Fine Dust from Stainless Steel Making

作　　者：李园超 俞晓[1] 王强[1] 李秋菊[1] 洪新[1] 

机构地区：[1]上海大学钢铁冶金重点实验室,上海200072

出　　处：《过程工程学报》2010年第6期1115-1118,共4页The Chinese Journal of Process Engineering

基　　金：国家自然科学基金重点资助项目(编号:50634040)

摘　　要：采用自主设计的间歇振动式斜直管移动床反应器对不锈钢冶炼粉尘进行预还原,以铁浴终还原炉产生并重整的含H2和CO的混合气体作为还原气,探索中低温条件下各因素对不锈钢粉尘预还原反应的影响.结果表明,在气固比0.85L/g、还原气体成分CO0～40%(φ)、振动间歇比1:2的优化条件下,预还原率较高,最高可达73.6%.Pre-reduction of fine dust from stainless steel making was studied in a new designed moving bed reactor with inclined tube and intermittent vibrators. In experiments,mixed gas of H2 and CO was used to simulate the exhaust gas from the end reforming,for the purpose to examine the influences of different factors on the process of pre-reduction of fine dust from stainless steel making. The results show that gas-solid ratio 0.85 L/g,component of reducing gas CO 0～40%（φ）,and intermittent-vibration ratio 1：2 were the optimal conditions,and the maximal reduction rate of 73.6% was reached.

关 键 词：不锈钢冶炼 粉尘 中低温 预还原 振动间歇比 

分 类 号：TF09[冶金工程—冶金物理化学]