一种1024级灰度大电容负载的LCD驱动芯片设计  

Design of LCD Driver Chip with 1024-Level Gray Scale and Large Capacitor Load

作　　者：尹东辉[1] 任彦楠[1] 岳超[1] 李福乐[1] 池保勇[1] 陈志良[1] 

机构地区：[1]清华大学微电子学研究所,北京100084

出　　处：《液晶与显示》2011年第1期78-82,共5页Chinese Journal of Liquid Crystals and Displays

摘　　要：设计了一种基于动态扫描原理的液晶显示(LCD)驱动芯片。该芯片为高压CMOS数模混合集成电路并支持输出频率可选功能。芯片输入数据频率为13.5MHz,输出1 024级256列模拟电压信号直接驱动LCD,输出电压幅度可达12V以上。负载为200pF时,最大摆幅上升/下降时间小于5μs。芯片采用新加坡特许半导体(Chartered)0.35μm、18V高压工艺设计,并进行了仔细的版图设计以减小匹配误差,仿真结果显示电路性能完全满足设计指标要求。A single driver chip based on dynamic scanning is developed for Liquid Crystal Display（LCD）.The chip is a high voltage CMOS IC with mixed signals and offers optional output frequencies.The input data frequency of the chip is 13.5 MHz,and the 256 columns＇ output voltage signals directly drive the LCD.The output signal range of every column is over 12 V,which is divided into 1 024 levels.The max-range rising/falling time of the output signal can be less than 5 μs when load capacitor is 200 pF.The chip has been realized in Chartered 0.35 μm 18 V high voltage process and the layout is designed carefully to minimize the mismatch error.Post layout simulation results illustrate that the design can well accord with the specification.

关 键 词：LCD 显示驱动 CMOS 高压数模混合 

分 类 号：TN27[电子电信—物理电子学] TN702.2