首钢京唐5500m^3高炉采用的新技术  被引量:26

New Technologies of 5500m^3 Blast Furnace at Shougang Jingtang

在线阅读下载全文

作  者:张福明[1,2] 钱世崇[2] 张建[1,2] 毛庆武[1,2] 苏维[2] 

机构地区:[1]北京科技大学冶金与生态工程学院,北京100083 [2]北京首钢国际工程技术有限公司,北京100043

出  处:《钢铁》2011年第2期12-17,共6页Iron and Steel

基  金:国家"十一五"科技支撑计划资助项目(2006BAE03A10)

摘  要:介绍了首钢京唐钢铁厂5 500 m3高炉设计特点和采用的先进技术。高炉设计中采用合理炉料结构、炉料分级入炉技术;自主设计开发了并罐式无料钟炉顶设备和炉料分布控制技术;采用纯水密闭循环冷却、铜冷却壁、薄壁内衬等高炉综合长寿技术,高炉设计寿命25年;采用高风温顶燃式热风炉和助燃空气高温预热技术,设计风温1 300℃;采用平坦化出铁场和铁水直接运输工艺、环保型螺旋法渣处理工艺;设计开发了特大型高炉煤气全干法布袋除尘技术;采用并罐式浓相喷煤技术;设计了完备的自动化检测和控制系统以及环境除尘系统,使高炉生产实现了"高效、低耗、长寿、清洁"的目标。The technical features and advanced technologies of the 5 500 m3 blast furnace in Shougang Jingtang Iron and Steel Co.,Ltd.were introduced.Reasonable BF burden design and classified burden charging technologies were applied.Bell-less top equipment was self designed and developed,and burden distribution control technology was applied.High-efficiency long campaign life technology of blast furnace including closed loop soft water cooling system,copper stave,thin wall lining etc.was applied,and the design campaign life of the BF was 25 years.The high blast temperature dome combustion hot blast stove and high temperature preheating of combustion air technologies were applied,and the design blast temperature was 1 300 ℃.Flat casthouse,direct transportation of hot metal,environment-friendly screw type slag treatment technologies were applied.BF gas dry bag filter dedusting technology in extra large BF was designed and developed.The high density pulverized coal injection technology with parallel hoppers was applied.The complete automation control system and environmental cleaning system was applied.With all the new technologies mentioned above,the BF operation has achieved the target of high efficiency,low consumption,long campaign and cleanness.

关 键 词:高炉 炼铁 无料钟炉顶 顶燃式热风炉 煤气干法布袋除尘 

分 类 号:TF57[冶金工程—钢铁冶金]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象