Continuous FEM simulation of multi-pass plate hot rolling suitable for plate shape analysis  

作　　者：张金玲 崔振山 

机构地区：[1]National Die and Mold CAD Engineering Research Center,Shanghai Jiao Tong University

出　　处：《Journal of Central South University》2011年第1期16-22,共7页中南大学学报（英文版）

基　　金：Project(20050248007) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China

摘　　要：In order to continuously simulate multi-pass plate rolling process,a 3-D elastic hollow-roll model was proposed and an auto mesh-refining module with data passing was developed and integrated with FE software,Marc.The hollow-roll model has equivalent stiffness of bending resistance and deformation to the real solid and much less meshes,so the computational time is greatly reduced.Based on these,the factors influencing plate profile,such as the roll-bending force,initial crown,thermal crown and heat transfer during rolling and inter-pass cooling can be taken into account in the simulation.The auto mesh-refining module with data passing can automatically refine and re-number elements and transfer the nodal and elemental results to the new meshes.Furthermore,the 3-D modeling routine is parametrically developed and can be run independently of Marc pre-processing program.A seven-pass industrial hot rolling process was continuously simulated to validate the accuracy of model.By comparison of the calculated results with the industrial measured data,the rolling force,temperature and plate profile are in good accordance with the measured ones.In order to continuously simulate multi-pass plate rolling process, a 3-D elastic hollow-roll model was proposed and an auto mesh-refining module with data passing was developed and integrated with FE software, Marc. The hollow-roll model has equivalent stiffness of bending resistance and deformation to the real solid and much less meshes, so the computational time is greatly reduced. Based on these, the factors influencing plate profile, such as the roll-bending force, initial crown, thermal crown and heat transfer during rolling and inter-pass cooling can be taken into account in the simulation. The auto mesh-refining module with data passing can automatically refine and re-number elements and transfer the nodal and elemental results to the new meshes. Furthermore, the 3-D modeling routine is parametrically developed and can be run independently of Marc pre-processing program. A seven-pass industrial hot rolling process was continuously simulated to validate the accuracy of model. By comparison of the calculated results with the industrial measured data, the rolling force, temperature and plate profile are in good accordance with the measured ones.

关 键 词：multi-pass rolling continuous simulation equivalent hollow roll mesh refinement data passing plate shape 

分 类 号：TG335.11[金属学及工艺—金属压力加工]