固态缩聚聚酰胺66的流变性能研究  

STUDY ON RHEOLOGICAL PROPERTIES OF SSPPA66

作　　者：杨吉湍[1] 李新法[1] 张喜亮[1] 沈百拴[1] 

机构地区：[1]郑州大学材料工程系,郑州450052

出　　处：《高分子材料科学与工程》1999年第6期95-97,共3页Polymer Materials Science & Engineering

基　　金：河南省自然科学基金

摘　　要：利用Ｉｎｓｔｒｏｎ ３２１１型毛细管流变仪研究了固态缩聚聚酰胺６６（ＳＳＰＰＡ６６）的流变性能，讨论了剪切速率！ 剪切应力和温度对ＳＳＰＰＡ６６ 熔体表观粘度的影响ァ结果表明，ＳＳＰＰＡ６６ 熔体的表观粘度随着温度的升高而降低；粘流活化能ΔＥ随剪切速率的增大而减小。在实验温度下，ＳＳＰＰＡ６６ 熔体的表观粘度随剪切速率和剪切应力的增大而降低，非牛顿指数ｎ 小于１，ＳＳＰＰＡ６６ 熔体为假塑性流体。Polyamide66 is a very useful commercial engineering plastic. The melt rheological properties of polyamide66 prepared by solid state polycondensation(SSPPA66) were studied.A Instron 3211 type capillary rheometer was used to obtain shear stress shear rate data, melt viscosity, non Newtain index n and the activation energy for viscous flow Δ E . The experimental results show that the melt apparent viscosity of SSPPA66 decreases with increase in temperature, the activation energy for viscous flow Δ E decreases with increasing shear stress and shear rate. At given temperature the melt viscosity decreases with increasing shear stress and shear rate. The value of n was less than 1, indicating a pseudoplastic nature of the melt SSPPA66. There is no report about it.

关 键 词：固态缩聚 聚酰胺66 流变性 缩聚 

分 类 号：O631.21[理学—高分子化学] O633.22[理学—化学]