基于BioWin的MBR工艺模拟  

BioWin-based MBR process modeling

作　　者：艾冰[1] 郝二成[1] 顾剑[1] 许世伟[1] 李胜田[1] 周军[1] 

机构地区：[1]北京城市排水集团有限责任公司,北京100044

出　　处：《给水排水》2011年第3期100-103,共4页Water & Wastewater Engineering

基　　金：国家水体污染控制与治理科技重大专项(2008ZX07314-008)

摘　　要：以实际运行污水处理厂MBR工艺为研究对象,利用BioWinTM软件平台及其内嵌的通用活性污泥模型和厌氧消化模型(ASDM),建立了工艺模拟模型并进行初步模拟及校正,利用校正的模型对MBR工艺的运行参数进行了模拟分析,得到出水水质对工艺参数的敏感度,从而总结出了部分运行指南。Taking the actual operating MBR process in wastewater treatment plant as the object,and using the BioWinTM software platform and the embedded general activated sludge/anaerobic digestion model（ASDM）,this paper set up a process simulation model and carried the primary simulation and calibration.The simulation analysis of the MBR operation parameters was carried out with the calibrated model,and the sensitivity of the water quality to the process parameters was figured out and partial operation manual was also summarized.

关 键 词：数学模拟技术 水质特性 MBR工艺 校准 验证 

分 类 号：X703[环境科学与工程—环境工程]