高位转换防屈曲支撑减震结构支撑简化设计方法研究  

A simplified design method for buckling-restrained brace of one high-level transfer story structure with dampers

作　　者：邓雪松[1] 吴从晓[1] 周云[1] 吴从永[2] 

机构地区：[1]广州大学土木工程学院,广州510006 [2]广州大学建筑设计研究院,广州510405

出　　处：《振动与冲击》2011年第2期248-251,共4页Journal of Vibration and Shock

基　　金：国家自然科学基金项目(50678040);广东省自然科学基金团队项目(8351009101000001);广东省自然科学基金项目(8151009101000010);减震控制与结构安全开放实验室项目;工程抗震与结构诊治北京市重点实验室项目

摘　　要：根据《高层建筑混凝土结构技术规程》和《建筑抗震设计规范》对高位转换结构体系框支层的层间位移和结构等效侧向刚度的限制要求,采用等效侧向刚度计算方法,将高位转换防屈曲支撑减震结构分解成框撑剪力墙结构和纯剪力墙结构,结合框支结构位移计算方法,推导出了高位转换防屈曲支撑减震结构支撑合理弹性刚度的计算公式及设计方法。通过算例分析得出,采用该推导出的计算高位转换防屈曲支撑减震结构的支撑弹性刚度计算公式和设计方法是可行的,并且该计算公式简单实用,可用于高位转换防屈曲支撑减震结构中支撑的初步设计。Based on the limited demands of inter-story drift and equivalent lateral rigidity ratio of a high-level transfer story structure in the technical specification for concrete structures of tall building and the code for seismic design of buildings,a calculation model that a high-level transfer story structure with BRBs was decomposed into a frame-with-BRBs-shear-wall structure below its transfer story and a shear-wall structure above its transfer story with an equivalent lateral rigidity ratio was proposed.Then,based on the above model,calculating formulas of elastic stiffness and simplified design method for BRB of the high-level transfer story structure were derived.Finally,an example structure was studied utilizing the above method.The results indicated that the proposed formulas and method are valid and may be a reference for designing high-level transfer story structures with BRBs.

关 键 词：高位转换耗能减震结构 防屈曲支撑 弹性刚度 

分 类 号：TU352.1[建筑科学—结构工程]