活性炭基脱硫剂吸附脱除天然气中H_2S的研究  

Removal of hydrogen sulfide from natural gas with activated carbon desulfurizer

作　　者：樊辉 陈陆建[2] 赵红[2] 甑建[2] 孙文成 胡康宁[2] 

机构地区：[1]新疆三叶管道技术有限责任公司,克拉玛依834002 [2]中石油新疆油田分公司,克拉玛依834000

出　　处：《天然气化工—C1化学与化工》2011年第1期34-38,共5页Natural Gas Chemical Industry

摘　　要：以活性炭为载体,采用浸渍法制备了以CuO为活性组分的活性炭基的天然气脱硫剂CuO/AC,考察了脱硫剂的制备条件对脱硫效果的影响,并对脱硫剂性能进行了评价。研究结果表明,适宜的脱硫剂制备条件为,当活性组分含量5.0%,焙烧温度350℃,焙烧时间1.0h～2.0h时,脱硫效果最好,穿透硫容可达20.80%。在气体空速为600h-1～800h-1,温度20℃,压力常压条件下,本研究的吸附剂的脱硫性能好于国外的RGM。Activated carbon modified with CuO for removal of H2S from natural gas was prepared by impregnation.Effects of preparation conditions on the desulfurizing performances of CuO/AC desulfurizer were investigated.The optimum preparation conditions were determined as follows： active component Cu mass fraction of 5.0%,calcination temperature of 350℃ and calcination time of 1.0-2.0 h.The sulfur capacity of the desulfurizer prepared under the optimized conditions could reach 20.80%.When at a gas hourly space velocity of 600-800h-1,temperature of 20℃ and atmospheric pressure,the prepared desulfurizer showed better desulfuriztion effect than RGM from abroad.

关 键 词：天然气 活性炭 脱硫剂 制备 H2S 

分 类 号：TE624.54[石油与天然气工程—油气加工工程]