柔性曲面挤压式排种器性能试验研究  

Performance Test for Flexible Surface-extrusion Seed-metering Device

作　　者：刘曙光[1,2] 尚书旗[1] 杨然兵[1] 郑月男[1] 赵建亮[1] 

机构地区：[1]青岛农业大学机电工程学院,山东青岛266109 [2]中国农业大学(烟台)理工学院,山东烟台264670

出　　处：《农机化研究》2011年第4期116-120,共5页Journal of Agricultural Mechanization Research

基　　金：农业部"948项目"(2009-Z22)

摘　　要：主要以引进的柔性曲面挤压式排种器为研究对象,采用正交旋转组合试验研究该排种器的工作参数—前进速度v、转动速度n对各行行内播种均匀性变异系数v1、各行行间播种一致性变异系数v2、总播种量稳定性变异系数V与破损率A的影响,通过DPS 9.50数据处理系统进行数据分析建立了数学模型,并进一步对数学模型进行分析。分析结果表明,v和n的变化对v1,v2,V的影响均极显著(P<0.01),在α=1%的水平上两因素各影响因子均极显著(P<0.01),而破损率A在试验过程中始终为0。从回归方程中得出两因素取值范围内各试验指标的变动范围:v1为[3.5848,6.2446],v2为[1.3608,3.5882],V为[0.6452,3.4790]。This article mainly takes the flexible flat - friction seed - metering device imported as the research object. The effect rules of the two working parameters, such as motion velocity（v）, rotate velocity（n）, on the CV of seeding uniformity in the lines（v1 ）, the CV of seeding consistency between the lines（v2 ）, the CV of seeding rate stability（V） and breakage rate （A） are analyzed by the two factors quadratic orthogonal rotational combination experimental design. With DPS 9.50 data processing system these mathematical models are set up and further analyzed. From the result, there is a very significant regression between v, n and vt ,v2, V（ P 〈 0.01 ）and the factors are all significantly at level α = 1% （P 〈 0. 01 ）. Breakage rate A is zero throughout the experiment. From these regression equations, in the values range of the two factors the ranges of v1 is [ 3. 584 8,6. 244 6 ] , the ranges of v2 is [ 1. 360 8,3. 588 2 ], the ranges of V is [ 0. 645 2, 3.479 03.

关 键 词：排种器 柔性 挤压式 

分 类 号：S223.2[农业科学—农业机械化工程]