A robust and simple two-mode digital calibration technique for pipelined ADC  

作　　者：殷秀梅 赵南 玻梅 杨华中 

机构地区：[1]Department of Electronic Engineering,Tsinghua University

出　　处：《Journal of Semiconductors》2011年第3期81-87,共7页半导体学报（英文版）

基　　金：Project supported by the National Natural Science Foundation of China(No.90307016);the National Science and Technology Major Project of China(No.2010ZX03006-003 -01)

摘　　要：This paper presents a two-mode digital calibration technique for pipelined analog-to-digital converters （ADC）.The proposed calibration eliminates the errors of residual difference voltage induced by capacitor mismatch of pseudorandom（PN） sequence injection capacitors at the ADC initialization,while applies digital background calibration to continuously compensate the interstage gain errors in ADC normal operation.The presented technique not only reduces the complexity of analog circuit by eliminating the implementation of PN sequence with accurate amplitude in analog domain,but also improves the performance of digital background calibration by minimizing the sensitivity of calibration accuracy to sub-ADC errors.The use of opamps with low DC gains in normal operation makes the proposed design more compatible with future nanometer CMOS technology.The prototype of a 12-bit 40-MS/s pipelined ADC with the two-mode digital calibration is implemented in 0.18-μm CMOS process.Adopting a simple telescopic opamp with a DC gain of 58-dB in the first stage,the measured SFDR and SNDR within the first Nyquist zone reach 80-dB and 66-dB,respectively.With the calibration,the maximum integral nonlinearity （INL） of the ADC reduces from 4.75-LSB to 0.65-LSB,while the ADC core consumes 82-mW at 3.3-V power supply.This paper presents a two-mode digital calibration technique for pipelined analog-to-digital converters （ADC）.The proposed calibration eliminates the errors of residual difference voltage induced by capacitor mismatch of pseudorandom（PN） sequence injection capacitors at the ADC initialization,while applies digital background calibration to continuously compensate the interstage gain errors in ADC normal operation.The presented technique not only reduces the complexity of analog circuit by eliminating the implementation of PN sequence with accurate amplitude in analog domain,but also improves the performance of digital background calibration by minimizing the sensitivity of calibration accuracy to sub-ADC errors.The use of opamps with low DC gains in normal operation makes the proposed design more compatible with future nanometer CMOS technology.The prototype of a 12-bit 40-MS/s pipelined ADC with the two-mode digital calibration is implemented in 0.18-μm CMOS process.Adopting a simple telescopic opamp with a DC gain of 58-dB in the first stage,the measured SFDR and SNDR within the first Nyquist zone reach 80-dB and 66-dB,respectively.With the calibration,the maximum integral nonlinearity （INL） of the ADC reduces from 4.75-LSB to 0.65-LSB,while the ADC core consumes 82-mW at 3.3-V power supply.

关 键 词：analog-to-digital converter pipelined ADC background calibration finite DC gains of opamps capacitor mismatch pseudorandom noise sequence 

分 类 号：TN792[电子电信—电路与系统] TQ172.622[化学工程—水泥工业]